MPLC-378T – פיקסל לד קונטרולר

MPLC-378T – פיקסל לד קונטרולר
בקר לד קונטרולר 8 פורטים מולטי פרוטוקול ArtNet sACN KNX

MPLC-378T is the LED DMX512 controller developed by LINETX which is suitable for most LED lighting project for use,

Device has rich functions and features:

• ArtNet Protocol : Support the ArtNet-4, support all software and device with ArtNet
• sACN Protocol: Support sACN (E1.31) protocol function
• KNXnet/IP Protocol: Support KNXnet/IP, can join KNX control system using ETS5 to config
• UDP/RS485 CMD Protocol： Support text command to control device remotely
• 8 Pixel LED Strip Drive Port : Each TTL port has 4 Universes
• Dual Ethernet Ports : Build in ethernet switch module, easily to connect each device hand in hand
• SD Card: Device has 16G SD card used to record or playback the lighting effect.
• ArtNet Record : Support to record the ArtNet(MA2/MADRIX) and save it to file using 16G SD card
• ArtNet Playback : support to playback the SD file which is recorded by device
• Master or Slave : Device support to be LED master or slave role as needed
• Playlist : Create multiple playlists and play different files according to different scenarios
• Fade In/Out: support fade in/out effect when switch SD effect file
• GPS Module : Support sync play using GPS module
• Free Effect Software: LINETX’s LED effect software is free to use to make effect for LNX-378
• Senmatic Lighting : Support rich Sematic Lighting command to dim the effect of light
• Test Mode : Have testing light mode to test whether the LED strip is work reliably
• WEB Interface : Support to use WEB to configure the parameter of device
• HMI : 5 keys and screen to config device in-place
• DMX Control : Use DMX console to trigger the SD file to play or change other parameters
• Cloud Control: Remotely configure the controller through LINETX Cloud Server;
• Audio Control : Analyze audio signal to sync the LED lighting and music
• Live Upgrade : Support upgrade firmware of device through ethernet using LnxManager
• Factory Reset : The system parameters can be factory reset if needed